> For the complete documentation index, see [llms.txt](https://docs.gxc.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.gxc.io/hw/lte/4g-mesh-nodes/gm02/gm02-mesh-node-installation-guide/document-overview-and-safety-information.md).

# Document Overview and Safety Information

The following topics provide overall information about this guide and important safety information.

## About this Guide

This guide provides the information you need to install and configure a GXC GM02 Mesh Node. It also includes a general description of the unit, guidelines for using it, an overview of its capabilities and operating instructions.

{% hint style="info" %}
**NOTE:** Installation of this device should only be performed by a Certified Professional Installer (CPI) in a fixed outdoor environment per limitations set forth in FCC Part 96 CBRS band, as well as guidelines as summarized by the OnGo Alliance.
{% endhint %}

## Safety Information

For the safety of installation personnel and for the protection of the equipment from damage, please read all safety warnings. If you have any questions concerning the warnings, before installing or powering on the equipment contact GXC.

{% hint style="danger" %}
**WARNING:** Read the installation instructions before connecting the system to its power source.
{% endhint %}

{% hint style="danger" %}
**WARNING:** Equipment installation must comply with local and national electrical codes.
{% endhint %}

{% hint style="danger" %}
**WARNING:** This product relies on the existing building or structure for short-circuit (overcurrent) protection. Ensure that the protective device is rated no greater than 20A.
{% endhint %}

{% hint style="danger" %}
**WARNING:** Do not operate this wireless network device near unshielded blasting caps or in an explosive environment.
{% endhint %}

{% hint style="danger" %}
**WARNING:** In order to comply with the United States Federal Communications Commission (FCC) radio frequency (RF) exposure limits, antennas for a GM02 Mesh Node should be located at a minimum of 20 centimeters (7.9 inches) or more from the body of all persons.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.gxc.io/hw/lte/4g-mesh-nodes/gm02/gm02-mesh-node-installation-guide/document-overview-and-safety-information.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.