Settings

The Settings page allows you to specify the CPE Antenna Gain, select the APN of the Mesh Backhaul, and change the Wi-Fi password and the LCI password. The current settings of the CPE Antenna Gain, and the Mesh Backhaul APN are displayed when the Settings page is opened.

Set the CPE Antenna Gain

It is the responsibility of the installer to confirm that the value in the CPE Antenna Gain field matches the actual gain of the CPE (Customer Premise Equipment) antenna that is being used for the backhaul. The GM01 will reduce the transmit power to the antenna based on this setting.

To enter the antenna gain:

1

Click the Settings link at the top right side of any of the Mesh Node’s webpages to open the Settings page.

2

Enter the correct gain value in the CPE Antenna Gain field. (The default value is 20dB.)

3

Click the Save button.

CAUTION: It is the installer’s responsibility to ensure that the value entered for the CPE Antenna Gain accurately represents the actual gain of the backhaul antenna.

Enter the MeshBackhaul APN

The APN for a GM01 Mesh Node SIM is “MeshBackhaul”. The APN is case-sensitive with an uppercase “M” and “B” and all other letters lowercase. This APN must match the “MeshBackhaul” APN specified in the Onyx Portal in order for the Mesh Node to connect to the Onyx Portal.

1

Click the Settings link at the top right side of any of the Mesh Node’s webpages to open the Settings page.

2

Enter “MeshBackhaul” in the Mesh Backhaul APN field.

3

Click the Save button.