G229 Specification Sheet
G229 Indoor FDD Access Point
The GXC G229 is a low-power indoor Access Point that operates in LTE Frequency Division Duplexing (FDD) mode. Featuring 2x400mW output, it is ideal for use in small enterprises and other indoor scenarios.
Technology
Standard
LTE FDD RAN (3GPP R10 compliant)
Frequency Band
B3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz)
Channel Bandwidth
5/10/15/20 MHz
Multiplexing
MIMO: 2x2 (DL)
Security
Radio: SNOW 3G/AES-128/ZUC Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128, SHA-256)
Interfaces
Ethernet Interface
One RJ-45 Ethernet backhaul interface (1 GE)
Power Supply
PoE++, comply with IEEE 802.3bt standard
LED Indicators
4 x status LED PWR/ACT/RUN/ALM
Link Budget
Antenna Type
External Omni Antenna, N type connector Horizontal Beamwidth 360° Vertical Beamwidth 40°±5 Polarization: Vertical
RF Antenna Gain
4 dBi
GPS Antenna
External GPS antenna, N type connector
Maximum EIRP
33dBm
Power Control
UL Open-loop/Closed-loop Power Control, DL Power Allocation (3GPP TS 36.213 compliant)
Physical
Operating Temperature
-40°F to 131°F (-40°C to 55°C)
Storage Temperature
-49°F to 158°F (-45°C to 70°C)
Humidity
5% to 95% RH
Power Consumption
Typical 22.5W, maximum 30W
Weight
5.73 lbs. (2.6kg)
Dimensions (H x W x D)
10.5 x 9.8 x 3.2 in (267 x 248 x 80.5 mm)
Installation
Wall mount, or desktop
Global Part Numbers
GXC-API-229
G229 Indoor FDD AP – LTE Release 10, 2x400mW (26 dBm), 1GE, 4 dBi external antenna, UL1710-1785MHz / DL1805-1880MHz, B3
Specifications and ID are subject to change without notice.
Last updated
Was this helpful?