NG1 Specification Sheet
Onyx Network Gateway (NG1)
*Representative images
The Onyx-NG1-5G is a network edge appliance designed for high-performance on-premises 5G service delivery. It provides core network functionality, radio access and control, and grandmaster precision timing synchronization for connected radio units. Built for demanding edge environments, the Onyx-NG1-5G ensures reliable 5G network operations, making it ideal for industrial and mission-critical applications where durability and performance are essential.
Technology
Model Overview
1U rear port access 15.5 inches nominal rack depth Single AC power supply Connectivity for 1 to 3 cells
Networking
1 x 1GbE RJ45 management port 4 x 10/25GbE SFP28 ports 3 ports for radio unit fronthaul 1 port for network backhaul 1 x SMB-GNSS antenna port 2 x SMA-1pps IN/OUT for multi-server synchronization Local PTP grandmaster for IEEE 1588 PTP synchronization and SyncE support
Operating Temperature Range
50°F to 95°F (10°C to 35°C)
Chassis Dimensions (W x D x H)
16.93 x 15.48 x 1.71 inches 430.0 x 393.2 x 43.5 mm
Mounting Options
Rack-mountable (1U form factor)
Power Supply (AC)
Single
Power Consumption (W)
Typical: 180W Maximum 300W
Included Items
Onyx-NG1-5G
Network Gateway Hardware
1
Network Gateway Appliance
Power Cords
NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 ft (3 m), Power Cord, North America
1
Included with Network Gateway
SFP+ Transceivers
10G SFP+, 1310 nm, Single-Mode, Duplex LC, Long Range
2
Included with Network Gateway
Fiber Patch Cable
LC-to-LC Single Mode, 10 ft (3 m)
1
Included with Network Gateway
Mounting Rail Kit
Static Rails for 2/4-post Racks
1
Mounting Rail Kit Carton
Global Part Numbers
GXC-NG1
Onyx-NG1-5G Network Gateway (rear panel access)
Images shown are representative and may not reflect the exact product configuration
Specifications and ID are subject to change without notice.
Last updated
Was this helpful?