GM03 Specification Sheet
GM03 Mesh Node

The GXC GM03 Mesh Node enables an Access Point to wirelessly connect to the GXC Onyx Gateway Node. This is accomplished using self-interference mitigation techniques, allowing access and backhaul carriers to co-exist in CBRS Band n48. Together with GXC's Onyx Platform for orchestration, management, and SAS registration, the GM03 provides coverage extension and rapid deployment in areas where wired infrastructure is unavailable.
Backhaul
Band Support
Band n48 CBRS
Radio Technology
5G,40 MHz
Antenna Configuration
2T2R
Antenna Connector
2 x Type N connectors
TX Power
2x20 dBm conducted,
RX Sensitivity
-96 dBm per 10 MHz carrier
Insertion Loss (Filter)
2.6 dB (typical)
SIM Support
Dual-SIM, 2FF, external access
Hardware Specifications
Band of Operation
Band n48 CBRS
Antenna Configuration
2T2R
Antenna Connectors
AP Input: 2 x Type N connectors AP Antenna: 2 x Type N connectors
Max TX from Mesh AP
33 dBm per port
Antenna Isolation
Backhaul Access: 45 dB (minimum)
Insertion Loss (AP Interface)
2.6 dB (typical)
Power: Nominal Vin
48 VDC
Input Voltage Range
36 V to 60 V
Isolation
Input to Field-GND: 2.5 kVDC
Power Consumption
20 W (maximum)
AP Data Interface
RJ45 1 GbE IEEE-802.3ab, non-PoE
Wireless Diagnostic Interface
Wi-Fi diagnostic AP, 2.4 GHz
Installation
Pole or Wall Mount *
Dimensions
13.9 x 9.7 x 5.3 in
Weight
18.75 lb (8.505 kg)
Environmental Specifications
Operating Temperature
-40°C to +55°C
Storage Temperature
-45°C to +85°C
Humidity
5% to 95% RH
Atmospheric Pressure
751 to 1014 mbar (sea level to 2000 meters altitude)
Water / Dust Ingress
IP66
Operational Vibration (Random)
+12 dB/octave from 5 to 10 Hz, 0.04 m2/s3 from 10 to 50 Hz, -12 dB/octave from 50 to 100 Hz, 3 axes x 30 minutes, per IEC 60068-2-64 (Fh)
Operational Shock
100 half-sine pulses at 50m/s2 with 11 ms duration each of 6 directions, per IEC 60068-2-27 (Ea)
Salt-Fog Corrosion
240 hours at 35°C, 5% NaCl salt mist per IEC 60068-2-11 (Ka)
Certifications
FCC Part 96
Global Part Numbers
GXC-MEN-003
GM03 Mesh Node
The GXC GM03 is designed to operate in conjunction with an Access Point, which is required for the GM03 to function. Contact GXC on specific AP Model.
Specifications and ID are subject to change without notice.
Last updated
Was this helpful?
