G509-n26 Specification Sheet
G509-n26 Outdoor FDD Access Point

The GXC G509-n26 is an advanced, O-RAN compliant outdoor Access Point designed for high-performance 5G applications, with:
2T2R configuration with 40 W per antenna port
IP65 outdoor-rated design
Compliance with 5G NR FDD 3GPP standards
O-RAN 7-2x split architecture
Compatible with FDD b26/n26 frequency bands
Features 2 x 10G SFP+ interfaces for seamless DU or FHM connectivity
Technology
Standard
3GPP TS36.104, TS36.141, TS38.104, TS38.141
Duplex Mode
FDD
Frequency Band
b26/n26 UL (814-849) MHz / DL (859-894) MHz
Channel Bandwidth
20 MHz (35 MHz instantaneous)
Multiplexing
MIMO: 2T2R
Interfaces
Ports
2 x 10 Gbps SFP+/eCPRI (Fronthaul) 1 x 1 GbE RJ45 (Debug)
Power Supply
-48 VDC (-36 to -57 VDC)
LED Indicators
RUN, ALM, OP1, OP2, ACT, VSWR
Synchronization
PTP (IEEE 1588V2) / Sync-E
Antenna (RF)
2 x 4.3-10
Other
1 x DB15 RET port AISG v2.0
Link Budget
Max. Transmit Power
40 W (46 dBm) per RF antenna port
Compliance
3GPP
TS36.104, TS36.141, TS38.104, TS38.141
Shockproof Protection
NEBS GR63 Zone 4
Physical
Ingress Protection Rating
IP65
Operating Temperature
-40°F to +131°F (-40°C to +55°C) without solar radiation -40°F to +122°F (-40°C to +50°C) with solar radiation
Humidity
5% RH to 100% RH
Power Consumption
201 W@10% load 268 W@30% load 301 W@50% load 478 W@100% load
Weight
35 lb (16 kg)
Dimensions (H x W x D)
15.8 x 13 x 4.3 in (400 x 330 x 110 mm)
Installation
Wall, Pole Mount
Global Part Numbers
GXC-APOn26-509
G509-n26, Outdoor High power 5G Access Point band n26 2x2 MIMO 46 dBm
Specifications and ID are subject to change without notice.
Last updated
Was this helpful?
