G506 Specification Sheet

The GXC G506 is an advanced O-RAN compliant outdoor Access Point designed for high-performance 5G applications, featuring:
4T4R configuration with 5W per port output power
IP65-rated for outdoor deployment
Compliant with 3GPP 5G NR standards
Utilizes O-RAN 7-2x split architecture
Technology
Standard
3GPP TS36.104, TS38.141
Duplex Mode
TDD
Frequency Band
N77 UL/DL (3800 MHz – 4200 MHz)
N78 UL/DL (3300 MHz – 3800 MHz)
Channel Bandwidth
Up to 100 MHz
Multiplexing
MIMO: 4T4R
Interfaces
Ports
2 x 10 Gbps SFP+/eCPRI (Fronthaul) 1 x 1 GbE RJ45 (Debug)
Power Supply
-48 VDC (-36 to -57) VDC
LED Indicators
RUN, ALM, OP1, OP2, ACT, VSWR
Synchronization
PTP (IEEE 1588V2) / Sync-E
Antenna (RF)
4 x 4.3-10
Other
1XDB15 RET port AISG v2.0
Link Budget
Max. Transmit Power
5 W (37 dBm) per RF antenna port
Compliance
3GPP
TS38.104, TS38.141
Physical
Ingress Protection Rating
IP65
Operating Temperature
-40°F to +131°F (-40°C to +55°C) without solar radiation -40°F to +122°F (-40°C to +50°C) with solar radiation
Humidity
5% RH to 100% RH
Power Consumption
75 W@10% load 93 W@30% load 106 W@50% load 147 W@100% load
Weight
22.04 lbs. (10 kg)
Dimensions (H x W x D)
13.00 x 10.24 x 4.33 in (330 x 260 x 110 mm)
Shockproof protection
NEBS GR63 Zone 4
Installation
Wall, Pole Mount
Included Items
G506 Access Point
Main radio hardware
1
Main Access Point
SFP+ Transceivers
10G SFP+, 1310 nm, SM, Duplex LC, Long Range
2
Packaged separately
LC-to-LC Fiber Patch Cable
LC-to-LC Fiber Patch Cable Single Mode (10 m)
1
Packaged separately
Chassis Ground Cable
Green/Yellow wire with pre-terminated ring terminals, 6 AWG (16 mm2), 1.5 m,
1
Included with AP packaging
Fiber/Ethernet Connector Enclosure
Rosenberger RT RFE 2.0 IP67, Connector Enclosure Kit w/Seals
2
Included with AP packaging
DC Power Plug Kit*
2-Pin Power Plug Kit (26 Amp)
1
Included with AP packaging
Mounting Bracket Kit
Can be used to mount to various walls, ceilings and poles
1
Included with AP packaging
*The G506 does not ship with a AC/DC power converter. This kit allows the user to connect this AP to the customer's DC power plant. If the customer would like to purchase an AC to DC supply, the following model will meet the APs power requirements.
HLG-240H-48
Power supply: switching; LED; 240W; 48VDC; 5A; 90 to 305VAC; IP67
US Distributor:
Here is the process to use the above power converters with DC Power Plug kit to make the power supply for G506 - https://docs.gxc.io/hw/5g/5g-access-points/g506/g506-ap-hardware-installation-guide#power-supply-cable-assembly
Global Part Numbers
GXC-APOn77-506
G506-n77, Outdoor Medium power 5G Access Point band n77 4x4 MIMO 5 W (37 dBm)
GXC-APOn78-506
G506-n78, Outdoor Medium power 5G Access Point band n78
4x4 MIMO 5 W (37 dBm)
Last updated
Was this helpful?
