G105 AP Specification Sheet

G105 Indoor TDD Access Point

The GXC G105 is an advanced, O-RAN compliant Access Point designed for seamless 5G connectivity, with:

• 4T4R configuration with 250 mW per antenna port
• IP50 indoor-rated design
• Compliance with 5G NR TDD 3GPP R15 standards
• O-RAN 7-2x split architecture
• Compatible with n48, n77, and n78 bands
• Equipped with internal 6 dBi antennas (supports external antennas)
• Supports 2 Component Carriers (2CC)

Technology

Parameter	Specification
Standard	5G NR 3GPP TS38.104, Option 7-2a Category A
Duplex Mode	TDD
Frequency Band	n48: 3550 MHz to 3700 MHz n77: 3700 MHz to 4200 MHz (future release) n77a: 3700 to 3980 MHz n78: 3300 MHz to 3800 MHz
Channel Bandwidth	n48: (10, 20, 40) MHz n77: up to 100 MHz (future release) n77a: up to 100 n78: up to 100 MHz
Multiplexing	MIMO: 4T4R
Carrier Aggregation	2CC
Sub Carrier Spacing (SCS)	30 kHz / 60 kHz

Interfaces

Parameter	Specification
Ports	1 x 10 Gbps SFP+ (Fronthaul) 1 x 1 GbE RJ45 (802.3bt – Type 3 or Type 4 only)
Power	Option 1: Injector (Included), IEEE 802.3bt, Type 3 (PoE++ / UPoE), 60 W Option 2: Adapter, Input: 100-240 VAC, 50-60 Hz 1.5 A Max, Output: 12 VDC, 4.0 A, 48.0 W
LED Indicators	Power, S-Plane, Service
Antenna	External: 4 x SMA (GXC-APIn48-105, GXC-APIn78-105) Internal: 4 x 6 dBi omni (GXC-APIn48-105i, GXC-APIn78-105i)

Link Budget

Parameter	Specification
Modulation	256 QAM (UL/DL)
Max. Transmit Power	N48: 100 mW (20 dBm) @10MHz per RF antenna port 125 mW (20 dBm) @20MHz per RF antenna port 250 mW (24 dBm) @40MHz per RF antenna port N77/N77a: 250 mW (24 dBm) per RF antenna port N78: 250 mW (24 dBm) per RF antenna port

Compliance

Parameter	Specification
3GPP	5G NR TDD R16
EMC	EN 301489-1/-50, EN55032/55035, FCC Part 15 Class B (CBRS) EN 301908-1, EN 301908-24, EN 55385 (MPE) FCC Part 96 (CBRS), 5G NR JRL
Safety	IEC/EN 60950-1, CB - IEC/EN 62368-1

Physical

Parameter	Specification
Ingress Protection Rating	IP50
Operating Temperature	23 °F to 122 °F (-5 °C to +50 °C), (5 to 95) %RH
Power Consumption	< 45 W
Weight	< 8.8 lb (< 4 kg)
Dimensions (H x W x D)	10.2 x 11.0 x 3.5 in (260 x 280 x 90 mm)
Installation	Wall / Pole mount

Included Items

Item	Description	Qty	Notes
G105 Access Point	Main AP hardware	1	Main Acess Point
Antennas	Articulating SMA omni dipole antennas	4	Included with AP packaging
Mounting Bracket Kit	Can be used to mount to walls, ceilings, or poles	1	Included with AP packaging
SFP+ Transceivers	10 Gbps SFP+, 1310 nm, Single-Mode, Duplex LC, Long Range	2	Accessory Carton
LC-to-LC Fiber Patch Cable	LC-to-LC Fiber Patch Cable Single Mode 10 ft (3 m)	1	Accessory Carton
PoE Injector	PoE++ 802.3bt Type 3 AC/DC Midspan Injector, 60 W	1	Accessory Carton
PoE Injector AC Power Cord	3 ft (1 m) Heavy Duty Power Cord, NEMA 5-15P to C13 AC Power Cord, 15 A, 125 VAC	1	Accessory Carton
CAT6 Patch Cable	10 ft (3 m) Cat6 24AWG Unshielded Ethernet Network Patch Cable, Blue	1	Accessory Carton

Global Part Numbers

Part Number	Description
GXC-APIn48-105	Indoor Low power 5G Access Point (G105-48) band n48 4x4 MIMO 20 dBm, with external antennas
GXC-APIn48-105i	Indoor Low power 5G Access Point (G105i-48) band n48 4x4 MIMO 20 dBm, Internal Antennas
GXC-APIn77-105	Indoor Low power 5G Access Point (G105-77) band n77 4x4 MIMO 24 dBm (future release)
GXC-APIn77a-105	Indoor Low power 5G Access Point (G105-77a: 3700-3980 MHz) band n77 4x4 MIMO 24dBm
GXC-APIn78-105	Indoor Low power 5G Access Point (G105-78) band n78 4x4 MIMO 24 dBm
GXC-APIn78-105i	Indoor Low power 5G Access Point (G105i-78) band n78 4x4 MIMO 24 dBm, Internal Antennas

• Specifications and ID are subject to change without notice.